Table of Contents
Advertisement
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
U
, the cooking time
the actual time
0
, press the
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, the
symbol
and four zeros are shown on the display panel. Set
0
the time.
Press the
0
button.
1.
The display panel displays the time
Childproof lock
The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
Activating the childproof lock
Set the function control knob to the zero setting.
Press the
D
button for approximately four seconds.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic setting
Display brightness
™‹
Duration of signal after the cooking time or the
™‚
time set on the timer has elapsed
Time indicator
™ƒ
Time until a setting is applied
™„
Select default settings for all values.
™‡
* Default setting
The oven must be switched off.
Press the
0
button for approximately 4 seconds.
1.
The display panel will show the current basic setting for the
brightness of the indicators, e.g.
Set the basic setting using the buttons
2.
Automatic shut off
If the settings of the appliance are not changed for several
hours it is automatically shut off. The oven will stop heating.
This depends on the temperature or grill power selected.
Automatic shut off is activated
A signal will sound. The display shows
heating.
10
r
, the end time
p
0
sensor repeatedly until the
.
.
‚ƒ
‹‹
Selection
-
-
only when working
-
no*
™‹
for the Selection
or
.
@
A
"‰
. The oven will stop
Set the time with the buttons
2.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
or
Press the
0
1.
The time symbols light up on the display panel, the brackets
are located next to
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
The display panel shows the symbol
now activated.
Turning off the childproof lock
Press the
button for approximately four seconds.
D
The
D
symbol on the display panel goes off. The childproof
lock is now deactivated.
‹
Selection
low
approx. 10 sec
always*
approx. 2 sec
yes
Confirm with the
3.
The display panel shows the following basic setting. Using
the button
0
make the setting.
„
.
Press the
0
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
Turn the function control knob to the zero setting. The oven
switches off.
Cancelling the automatic shut off function
To avoid triggering the automatic shut off, a cooking time must
be set. The oven will heat until this time is up.
or
.
@
A
button four times.
.
0
or
.
@
A
D
. The childproof lock is
‚
Selection
ƒ
medium
approx. 2 min*
-
approx. 5 sec*
-
0
button.
select the levels and using the buttons
button for approximately 4 seconds.
Selection
„
high*
approx. 5 min
-
approx. 10 sec
-
or
@
A
Advertisement
Table of Contents
