Step 4: Making Adjustments Before Recording - Sony HDR-UX10 Operating Manual

Step 4: Making adjustments before recording
•
27
e
.
..
Viewfinder lens
adjustment lever
Move it until the
image is clear.
Fasten the grip belt and hold your
camcorder correctly.
.~.
Tips
• You can adjust the brightness of the viewfinder
backlight by touching
A
(HOME) -
;:; (SETTINGS) - [SOUNDIDISP SET] -
[VF B.LIGHT] (p.
94).
You can view images using the viewfinder
with the LCD panel closed to avoid wearing
down the battery, or when the image seen
on the LCD screen is poor.
Pull out the viewfinder, then place your
eyes on the viewfinder to watch images.
Adjust the viewfinder for clear viewing
according to your eye site.
Viewfinder
DISP/BATT INFO
.~.
Tips
• If you open the LCD panel
90
degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
• Touch
A
(HOME) -
~
(SETTINGS) -
[SOUNDIDISP
SET] - [LCD BRIGHT]
(p.
93)
to adjust the brightness of the LCD
screen.
• The information is displayed or hidden (display
--. no display) each time you press
DISPI
BATT INFO.
" Notes
• Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
To turn off the LCD backlight to make
the baUery last longer
Press and hold DISPIBA
TT
INFO for a few
seconds until
:~~F
appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To tum
on the LCD backlight, press and hold DISP/
BA
TT
INFO for a few seconds until
:~~F
disappears.
Open the LCD panel 90 degrees to the
camcorder
«1)),
then rotate it to the best
angle to record or play (®).
G)90 degrees to the
camcorder