Sony HDR-UX10 Operating Manual page 89

OFF (Ci))
Records without flash.
FACE DETECTION
A
Adjusts the focus/color/exposure of face
images automatically. Also, adjusts face
images for clear viewing.
U
Notes
• The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
• Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
· i
/CHG lamp (p. 139) flickers while charging
the flash, and remains lit when charging is
complete.
• If you use the flash when shooting a backlit
subject or in bright places, the flash may not be
effective.
FLASH LEVEL
A
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
HIGH(i+)
Makes the flash level higher.
~NORMAL(i )
LOW(i-)
Makes the flash level lower.
REDEYE REDUC
A
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
Set [REDEYE REDUC] to [ON], then set
[FLASH MODE] (p. 88) to [AUTO] or
[ON] to display
@.
You can prevent redeye by activating the
flash before recording.
U
Notes
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
~
ON
([:,l)
Detects face images in frames, then adjusts
their image quality automatically.
Face detection frame
ON [NO FRAMES]
([:'l)
Detects face images without frames, then
adjusts their image quality automatically.
OFF
Face images are no detected.
U
Notes
• Your camcorder may not be able to detect face
images depending on the recording condition.
• Your camcorder may not be able to optimize the
images depending on the recording condition. In
this case, set [FACE DETECTION] to [OFF].
n
INDEX SET
A
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
[i]:
This icon appears when the setting is
[ON].
1:]:
This icon flashes when your
camcorder detects a face. The icon
stops flashing when the face is
recorded in the Face Index.
OOJ :
This icon appears when faces cannot
be recorded in the Face Index.
•
n
=
en
-
o
3
13:
=
CCI
'<
o
=
. ..
n
l»
3
n
o
...
CI.
CD
...
Continued'"
89