Sony HDR-UX10 Operating Manual page 88

88
MOVIE SETTINGS (Continued)
GUIDEFRAME
A
You can display the guide frame and check
that the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The guide frame is not recorded. Press
DISPIBATT INFO to make the guide frame
disappear. The default setting is [OFF].
.~.
Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
ZEBRA
A
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, ~ is displayed. The zebra pattern
is not recorded.
~OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
" Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
.~.
Tips
• IRE represents the screen brightness level.
ttl
REMAINING SET
A
~ON
Always displays the remaining media
indicator.
AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
- When your camcorder recognizes the
remaining media capacity with the
ttl
(Movie) lamp lighting up.
- When you press DISP/BATT INFO to
switch the indicator from off to on with
the
ttl
(Movie) lamp lighting up.
- When you select the movie recording
mode on the HOME MENU.
" Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
SUB-T DATE
A
You can display the recording date and time
when you play back images on a device
with a subtitle display function. The default
setting is [ON]. Also refer to the instruction
manual of the playback device.
" Notes
• Discs recorded with HD (high definition) image
quality or the "Memory Stick PRO Duo" can
be played on AVCHD format compatible
devices only (p. 76).
• When [MOVIE MEDIA SET] is set to
[ijsoij INT. MEMORY] (HDR-UX20) or
[ijsoij MEMORY STICK], you cannot use this
function.
FLASH MODE
A
C5
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
~AUTO
Automatically flashes when there is
insufficient ambient light.
ON(S)
Always flashes regardless of the
surrounding brightness.