Table of Contents
Advertisement
Crying alert
The crying alert will only be activated if Mute All
has been switched on (or if the Parent unit volume
has been switched to volume off), see page 20 for
information on the Mute All feature.
With Mute All switched on, if your baby starts to cry
you will not be able to hear the cries, but if the cries
sound above a certain level i.e. if they reach 83dBA,
which is the 1st red Baby sound level LED, then the
Parent unit will activate the crying alert. The default
crying alert type is for the Parent unit to vibrate and
emit an audible beep but you can select a different
alert type if you want to.
Select the type of crying alert
1. Press
. Nightlight is displayed, press
until SetUp is displayed and press
2. Crying Alert is displayed, press
3. Use the
and
Beep, Beep&Vibe, Vibrate or Screen Only
and press
to select. The display will show
Saved and you will hear a confirmation beep.
To stop an alert, press any button on the Parent unit.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Using your BT Digital Baby Monitor 250
.
.
buttons to display either
Crying alert options
= Parent unit will beep,
Beep
will be displayed
Crying Alert
and
icon will flash.
= Parent unit will
Beep&Vibe
beep and vibrate.
Crying Alert
will be displayed and
icon
will flash.
= Parent unit will
Vibrate
vibrate only (no alert beep will
sound).
will be
Crying Alert
displayed and the
icon
will flash.
=
Screen Only
Crying Alert
will be displayed and the
icon will flash.
The default setting is
.
Beep&Vibe
The crying alert is a 'user alert'
as described on page 34.
33
Advertisement
Table of Contents
