Feed Timer; Set The Feed Timer Countdown Duration - BT 43282 User Manual

28 Using your BT Digital Baby Monitor 250
The timer can be set to
countdown from 1 minute to 99
hours 59 minutes.
The feed timer default
countdown duration is set at
02:00 (2 hours).
If the Parent unit is switched
off, the feed timer countdown
will be cancelled and you will
need to start it again when the
unit is switched back on. The
duration, alert type and repeat
settings will still be retained.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Feed Timer

You can set a Feed Timer on the Parent unit to act as
a countdown timer that will alert you when you next
need to feed your baby. You have a choice of alert
types (beep, beep & vibe and vibrate) and you can
set the timer to repeat itself once the alert sounds.

Set the feed timer countdown duration

1. Press . Nightlight is displayed, press
until Feed Timer is displayed and press
2. Start? is displayed, press
Duration and press
3. The display will show 00h:00m (or the currently set
timer). Use the and
first digit and press
each digit and press
The display will show Saved and you'll hear a
confirmation beep.
.
to display
.
buttons to select the
. Repeat this procedure for
.