Select The Type Of Temperature Alert; Temperature Alert Options - BT 43282 User Manual

32 Using your BT Digital Baby Monitor 250
Pre-set temperature
alert range
The Baby unit comes with
pre-set maximum and
minimum temperatures,
as stated by the UK
Department of Health as part
of the recommendations to
reduce the risk of cot death.
If the temperature falls below or
goes above the setting an alert
will sound on the Parent unit
and the display will show
or as appropriate.
Cold Too Hot
If it's too hot, the Baby unit
nightlight will turn red and
if too cold it will turn blue.
The temperature alert pre-set
temperatures are 15°C (and
below) and 25°C (and above).
Alerts will be repeated if the
temperature creeps by 2°C into
an alerting range.
The default setting is
.
Beep&Vibe
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Select the type of temperature alert

1. Press . Nightlight is displayed, press
until SetUp is displayed and press
2. Crying Alert is displayed, press
Temp Alert is displayed and press
3. Use the
Beep, Beep&Vibe, Vibrate, Screen Only or
Off and press
Saved and you will hear a confirmation beep.
To stop an alert, press any button on the Parent unit.
Too

Temperature alert options

Beep = Parent unit will beep.
Beep&Vibe = Parent unit will beep and vibrate.
icon will flash.
Vibrate = Parent unit will vibrate.
will flash.
Screen Only =
Off = No alerts.
All of the above alerts will also display the appropriate
message: Too Hot, Too Warm or Too Cold.
and buttons to display either
to select. The display will show
icon will flash.
icon will flash.
icon will not be displayed.
.
until
.
icon