BT 43282 User Manual page 37

Link light is flashing green
• If you have pressed
the Talk Back feature, the Link
light will flash to indicate one-way
communication between the units.
• The units are searching for a
communication link.
• Check units are within range of
one another.
• Check both units are turned on.
Link indicator is flashing red
• The Link between your units is
broken. You will also hear an alert
on the Parent unit to let you know
there is no communication between
the units. If this happens, check
that the mains power (or batteries)
is correctly connected and that
the units are within range of one
another. See page 15 for instructions
on linking the units.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Battery low on Parent unit
to use • Put the Parent unit back on the
charger to charge.
• Place Parent unit back on the charger
as frequently as possible or ideally
leave it on the charger to ensure the
batteries remain charged.
• To fully charge the batteries, the
Parent unit should be on charge for
approximately 16 hours to reach
maximum charge.
• To speed up the charging process
turn the Parent unit off when
charging if it is not being used.
Parent unit remains silent or
very quiet
• You may have set the volume
too low, see page 19 to increase
the volume.
• You may have switched a Mute
feature on, see pages 20-21.
Help 37