Mute All Feature - Parent Unit Only; Crying Alert - BT 200 User Manual

Mute All feature – Parent unit only
The Mute All feature prevents any sound coming
out from the Parent unit loudspeaker. With Mute All
on you can still monitor your baby using the Baby
sound level LED indicators (page 15) and the Crying
Alert (below).
1. To switch Mute All on, press the
on the top of the unit. The Mute indicator will
illuminate red.
2. To switch Mute All off, press the
The red Mute indicator will go off.

Crying alert

The crying alert will only be activated if Mute All has
been switched on (or if the Parent unit loudspeaker
volume has been switched off), see above for
information on the Mute All feature.
With Mute All switched on, if your baby starts to cry
you will not be able to hear the cries but if the cries
sound above a certain level i.e. if they reach 83dB,
which is the 1st red Baby sound level LED, then the
Parent unit will emit an audible beep.
The crying alert is a 'user alert' as described on page 21.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Using your BT Digital Baby Monitor 200
button located
button again.
Setting the Parent unit
loudspeaker volume to
Volume Off is the equivalent
of switching the Mute All
feature on.
If the or buttons are
pressed whilst Mute All or Mute
Low has been set then Mute All
or Low will be switched off and
the loudspeaker volume will
return to Level 3 automatically.
17