Switch Timer Repeat Option On Or Off; Select The Type Of Feed Timer Alert - BT 43282 User Manual

30 Using your BT Digital Baby Monitor 250
The default setting is
.
Repeat On
Feed timer alert options:
= Parent unit will emit an
Beep
alert beep only.
= Parent unit will
Beep&Vibe
emit an alert beep and vibrate.
= Parent unit will
Vibrate
vibrate only.
The default setting is
.
Beep&Vibe
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Switch timer repeat option on or off

1. Press . Nightlight is displayed, press
until Feed Timer is displayed and press
2. Start? is displayed, press
displayed and press
3. Use the and
Repeat On or Repeat Off and press
select. The display will show Saved and you will
hear a confirmation beep.
When Repeat On has been set, the feed timer
countdown will start again once the alert has
sounded if it is not switched off.

Select the type of feed timer alert

1. Press . Nightlight is displayed, press
until Feed Timer is displayed and press
2. Start? is displayed, press
displayed and press
3. Use the and
Beep, Beep&Vibe or Vibrate and press
to select. The display will show Saved and you will
hear a confirmation beep.
until Repeat is
.
buttons to display either
until Alert is
.
buttons to display either
.
to
.