Hardware Overview - D-Link dap-2695 Quick Installation Manual

Hardware Overview

LEDs
5 GHz - When lit, the access point is operating at 5GHz.
This light will blink when there is wireless traffic.
2.4 GHz - When lit, the access point is operating at
2.4GHz. This light will blink when there is wireless traffic.
LAN1/LAN2 - Solid light when the Ethernet port is con-
nected to a working port, such as a router or switch. The
light will blink when there is traffic through LAN port.
POWER - The light will blink during boot up. Once solid,
the access point is ready.
D-Link DAP-2695 Quick Install Guide
3