Siemens easyTek User Manual page 25

Pairing may take several seconds. The blue LED indicates
the pairing status:
Pairing status for Siemens transmitters
flashing, then on
➧
Pairing has been completed successfully. Streaming
starts automatically. You can now use the Siemens
transmitter.
flashing, then off
➧
Pairing was not successful. In this case, ensure that
the Siemens transmitter is within operating distance
and try again.
You can also use the easyTek App for pairing
Further information:
If the Siemens transmitter is only temporarily
■
(< 5 min) out of operating distance, the transmission
of the audio signal is interrupted but automatically
picked up again when the transmitter is back within
operating distance.
If a Siemens transmitter is already paired, you cannot
■
pair it again.
Audio streaming 23