Needle - Consew 226R Operating Instructions Manual

5
NEEDLE(Fig. 7)
.
I
I
CONSEW 206RB is set up to use standard style DPx17. The size of the needle
to be used should be determined by the size of the thread, which must pass free-
ly through the eye of the needle.
HOW TO ATTACHTHE NEEDLE
1. Turn the machine pulley over toward you until the needle bar<!) moves up to
its highest point.
2. Loosen the needle set screw@ and put the needle@ up into the needle bar
as deeply as it will go, with the long groove of the needle faces the left.
3. Tighten the needle set screw securely.
. I
i
I
I
I
Fig. 7
TEREAD
Cotton, synthetic or silk thread can be used according to your purpose.
*
Always use left twisted thread for upper (needle)thread, but you can use
either right or left twisted thread for lower (bobbin) thread_