Table of Contents
Advertisement
Fuel Shut-Off Valve
The fuel shut-off valve (Figure 17) is located on left
front of engine. Valve has two positions: Closed and
Open. Move lever to closed position when storing
or transporting machine. Open valve before starting
engine.
Recoil Starter
Pull recoil starter handle (Figure 18) to start engine.
1
Figure 18
1. Recoil starter
Specifications
Width
Height
Length with basket
Net weight
Width of cut
Height of cut
Clip frequency
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
G009975
Flex 21
35-1/2 inches (90.1 cm)
41–1/4 inches (104.8 cm)
61–1/2 inches (156.2 cm)
Model 04024–185 lb (84 kg)
Model 04202–82 lb (37 kg)
Model 04025–185 lb (84 kg)
Model 04208–89 lb (40 kg)
21 inches (53.3 cm)
1/16 to 19/64 inches (1.5 to 7.5 mm) with
Micro-Cut bedknife
11 blade (standard): .14 inch
Kickstand
The kickstand (Figure 19) is mounted to rear of machine
and is used to raise rear of machine for installation or
removal of transport wheels.
1. Kick stand
Flex 18
32 inches (81.3 cm)
41–1/2 inches (105.4 cm)
61 inches (155 cm)
Model 04019–175 lb (79 kg)
Model 04206–82 lb (37 kg)
Model 04207–89 lb (40 kg)
18 inches (45.7 cm)
1/16 to 19/64 inches (1.5 to 7.5 mm) with Micro-Cut
bedknife
11 blade (standard): .14 inch
16
Figure 19
Advertisement
Table of Contents
