Configuration Of Internet Access Parameters; Logging In To The Web-Based Configuration Utility - Huawei HG232f User Manual

www.4GSource.net
HG232f 300Mbps Wireless Router
User Guide
3

Configuration of Internet Access Parameters

3.1 Logging In to the Web-Based Configuration Utility

Most of the HG232f parameters are pre-set before delivery to meet common home
application scenarios. To check the HG232f's working status or configure certain
advanced network functions, use the web-based configuration utility.
To log in to the web-based configuration utility,
Step 1 Set up network access for your computer. Set the network connection of your computer
to obtain an IP address automatically.
By default, the Dynamic Host Configuration Protocol (DHCP) function is enabled.
The HG232f then assigns an IP address to your computer automatically. If you disable
the DHCP function, please ensure that the IP address of the computer and that of the
HG232f LAN interface are in the same network segment to enable the computer to
access the web-based configuration utility.
Step 2
Open a web browser on your computer and ensure that the browser does not use any
proxy servers.
Using Internet Explorer 8.0 as an example to ensure no proxy servers are used.
1. Start Internet Explorer. Choose Tools > Internet Options.
2. On the Connections tab of the Internet Options dialog box, click LAN Settings.
3. In the Proxy Server area, ensure that Use a proxy server for your LAN is cleared.
Step 3 Enter http://192.168.3.1 in the address bar, and then press Enter.
Step 4
Enter the user name and password in the Username and Password text boxes.


Step 5
Click Login.
After the system verifies your account information, the web-based configuration utility
is displayed.
The first time you log in to the web-based configuration utility, a setup wizard is displayed. To
skip the wizard and go immediately to the configuration page, click Here when the following
message displays: Click Here to enter the advanced configuration page.
Issue 01 (2012-05-08)
If Use a proxy server for your LAN is selected, clear Use a proxy server for your
LAN, and then click OK.
The first time you log in to the web-based configuration utility, check the label on the
HG232f's rear panel for the initial Username and Password.
For security reasons or to make the password easy to remember, you can change the user
name and password for the web-based configuration utility. For details, see chapter 6.1
"Changing the user name and Password of the Web-based Configuration Utility".
3 Configuration of Internet Access Parameters
3-1