Side-Discharging The Clippings - Toro Super Recycler 20381 Operator's Manual

Hide thumbs Also See for Super Recycler 20381:
Table of Contents

Advertisement

1. Lever
Note: To unlock the plug, rotate the lever on the plug
to the right
(Figure
5. Lower the discharge deflector.
Side-Discharging the
Clippings
Use the side-discharge feature for cutting very tall grass.
If the bag is on the machine, remove it and insert the
rear-discharge plug; refer to
14)
before side-discharging the clippings.
Important: Ensure that the rear-discharge plug is
locked in place. To lock the plug: Raise the discharge
deflector
(Figure
28), firmly push the plug in until it
snaps into place behind the tabs, and rotate the lever on
the plug to the left
(Figure
Figure 27
2. Tabs
27).
Removing the Grass Bag (page
28).
1. Discharge deflector
Note: To unlock the plug, rotate the lever on the plug to the
right
(Figure
27).
Installing the Side-Discharge Chute
1. Unlock the side-discharge door
2. Lift open the side-discharge door
3. Install the side-discharge chute and close the door onto
the chute
(Figure
15
G017463
Figure 28
2. Rear-discharge plug
(Figure
29).
Figure 29
(Figure
30).
Figure 30
31).
Figure 31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super recycler 20384

Table of Contents