Removing The Machine From Storage - Toro Super Recycler 20381 Operator's Manual

Removing the Machine from
Storage
1. Check and tighten all fasteners.
2. Remove the spark plug and spin the engine rapidly
using the starter to blow excess oil from the cylinder.
3. Install the spark plug and tighten it with a torque
wrench to 20 N∙m (15 ft-lb).
4. Perform any needed maintenance procedures; refer to
Maintenance (page
5. Check the engine-oil level; refer to
Engine-Oil Level (page
6. Fill the fuel tank with fresh gasoline; refer to
the Fuel Tank (page
7. Connect the wire to the spark plug.
8. Charge the battery (electric-start model only).
19).
Checking the
10).
10).
Filling
24