Function Settings; 11-1.Function Settings On Indoor Unit - Fujitsu ASYG30LMTA Design & Technical Manual

11. Function settings

To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
11-1. Function settings on indoor unit
Depending on the connected remote controller type or performing control, following setting is re-
quired:
2-wire-type wired remote controller is connected
3-wire-type wired remote controller is connected
Server room control
 Component location
Component on the indoor unit main PC board used for this setting is located as shown in the
following figure.
Indoor unit main PC board
Status
or
2WIRE/3WIRE
DIP switch
2WIRE/3WIRE
(Factory setting)
2WIRE/3WIRE
JM9
- 37 -
Jumper (JM9)
JM9
(Disconnected)
JM9
(Connected)
(Factory setting)
2WIRE/3WIRE