Table of Contents
Advertisement
VOX gain and delay adjustment
q Attach the connector of the VS-1SC into the [SP/MIC] connector
on the transceiver and tighten the screw.
• Toggle the toggle switch to [VOX].
w Enter user set mode. (pgs. 13, 20)
e Push [P0] several times to select "VOX Gain" or "VOX Delay."
Then, push [
r Rotate [VOL] to turn the power OFF to exit set mode.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF, or 1 through 6
for greater sensitivity.
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (in 0.5 sec.
steps) to set the interval before returning to receive.
NOTE: MIC/VOX gain can be adjusted by the adjusting pot
using a thin screw driver.
] or [
] to set the desired level/condition.
VOX gain level is 3 (default)
VOX delay timer is 0.5 sec. (default)
8
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
41
Advertisement
Table of Contents
