Brother HL-6050 User Manual page 38

Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam. Check
that transparencies are below the maximum paper mark ( ).
5
Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer.
6
Send the print data to the printer.
Caution
Remove each transparency before the next page is output on the top output tray to prevent
transparencies from sticking to each other.
Downloaded from ManualsPrinter.com Manuals
Figure 1-37
Figure 1-38
Figure 1-39
ABOUT THIS PRINTER 1 - 30