Brother HL-6050 User Manual page 58

Accessories tab
When you install the optional lower tray unit and other options, you can add it and select its settings in
the Accessories tab as follows.
4
1
You can manually add and remove the options for any optional unit device that is installed on the
printer. Tray settings will match the installed options.
2
RAMDISK
You can detect the capacity of the RAMDISK that has been set using the control panel. To find the
capacity of RAMDISK, click the RAMDISK check box and then click Auto Detect. For more
information, see Reprinting from RAM on page 3-3.
3
Paper Source Setting
This feature recognizes the paper size in each paper tray.
4
Auto detection of printer options
The Auto Detect function finds the currently installed optional unit devices and shows the available
settings in the printer driver. When you click the Auto Detect button, options that are installed on
the printer will be listed. You can manually add or remove options.
Auto Detect function is not available under certain printer conditions.
Downloaded from ManualsPrinter.com Manuals
1
2
3
DRIVER AND SOFTWARE 2 - 8