How To Use The Control Panel - Brother HL-6050 User Manual

How to use the control panel

When you use the Menu buttons (+, -, Set or Back), remember the following basic steps:
If no control panel operations are performed for 30 seconds, the LCD automatically returns to
READY.
When you press the Set button to choose a setting, an asterisk appears at the end of the display for
a short time. After that, the display returns to the previous menu level.
After changing the status or a setting, pressing the Back button before you press the Set button will
cause the display to return to the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press + or - to scroll up or down one number at a time,
or you can hold down + or - to scroll faster. The blinking number is the one that you can change.
Downloaded from ManualsPrinter.com Manuals
CONTROL PANEL 3 - 11