Fender Musical Instruments Co. All specifications subject to change without notice. For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used for post-warranty maintenance and repair.
KXR 60 SPECIFICATIONS Product Release No.: PR 299 (This is not a model number) POWER AMPLIFIER SECTION: Power output: 50 Watts RMS Distortion at 50 Watts: Less than .1% @ 1kHz, before compression Less than 1% @ 1kHz, maximum compression 8 Ω...
KXR 60 CIRCUIT DESCRIPTION Preamp The Channel One input will accept a Balanced or Unbalanced signal via a ¼” Phone plug. U1B provides a gain of 1, and rolls off high frequencies at about 128kHz. The signal then couples to the second half of the input stage.
KXR 60 DELTACOMP™ (CONT) As the capacitors charge, the negative voltage at the base of transistor Q8 turns on this Darlington device. Current flows from the Collector of Q8 to pin 5 of U9. This current controls the output amplitude of U9.
Page 6
048466 JACK RCA SINGLE PCB MOUNT J7,8 (REVERB PAN CONNECT) 020888001 JUMPER WIRE 22GA 028039000 LED RED 5X5MM SBL-55VR3 049248003 PCB ASSY KXR 60 STUFFED 024937001 5% 110 Ω LL R17,18,20,49,50 RES CF 1/4W 024952001 R24,61 RES CF 1/4W 5% 100Ω LL 0296060001 5% 510 Ω...