Using The Product - Whirlpool WW1640 X Manual

Table of Contents

Advertisement

Temperature and humidity
Temperature is a critical and vital factor during the entire life cycle of wine; it determines how well the
wine develops when matured in the bottle. To ensure optimal storage, the temperature must be kept
constant from 8 to 12 °C. Rapid, wide temperature swings must be avoided: when the temperature is too
high, the liquids dilate accelerating the ageing process whereas excessively low temperatures (below 4 - 5
°C) can cause the precipitation of tartrates; such an imperfection would impair the pleasant appearance of
the wine. In the extreme event that the temperature drops below 0 °C, the wine would freeze causing the
cork to explode.
Humidity is also crucial in optimal wine storage: dry environments cause the cork to shrink whereas overly
damp locations cause mould and harmful microorganisms to form. Humidity must be kept between 50% -
70%.
The cork
This is an essential part of the bottle: the quality of the cork, selected by the wine-maker, is very
important in the ageing process of the wine itself. The conditions of the cork, including corks in bottled
wine, depend solely on the process and storage standards used by the manufacturer or bottler.

USING THE PRODUCT

Starting up the appliance
• To switch the appliance on and adjust the temperature, refer to the product sheet attached.
• For the appliance to work correctly we recommend setting the temperature according to the
indications given in the "Introduction to wine" section.
Note:
The ambient air temperature, frequency of door opening and the position of the appliance can affect
internal temperatures. The set temperature must be adjusted based on these factors
Automatic winter function
The SN climate class ensures operation of your Wine Cellar in ambient temperatures between 10°C and
32°C.
The new Automatic winter function ensures correct storage temperature of your wine in rooms with
temperatures from 6°C and above.
This function is activated automatically by an external sensor if the room temperature falls below 10°C.
For room temperatures between 6 and 10°C, the internal temperature of the appliance will be
automatically set to an average of 4°C higher than the temperature of the room.
13

Advertisement

Table of Contents
loading

Table of Contents