Connect Es610 To The Vehicle; Step 3: Power On - esky ES610 Start Manual

Plug the part ④ of power supply line into ES610 power supply port (chapter 1 ③)

3.2.2 Connect ES610 to the Vehicle

Power lines, it can connect with cigarette lighter or OBD
I/O line, connects terminal with the I/O connector of wire harness.
For the detailed description, please refer to chapter 4.

3.3 Step 3: Power On

When finishing installation, as long as power supply line is connected with cigarette lighter or
OBD, ES610 is powered on and starts work.
Note: If ES610 is connected with cigarette lighter, then only the car is ignition on, cigarette lighter
will has voltage. That means, ES610 can be powered on.
(cigarette lighter)
(OBD)
Then, please check LEDs status.