Step 8: Normal Function Test (At) - esky ES610 Start Manual

Note: Do not forget the ENTER at the end of command.
The possible response:
① OK
GPRS=Success!
It means APN, server IP have changed successfully.
② OK
GPRS=Fail!
Try again
Please don't set any command within 1 ~ 2 min after ES610 is powered on.
Mark sure GPRS command spells correctly.
③ ERROR
Make sure that AT command mark spells correctly.
④No response.
Type "enter" again.
Re-type GPRS command again without pause.

3.8 Step 8: Normal Function Test (AT)

Since AT command is based on commands in <ES610 Protocol>, so you can choose whatever
command you want to test by AT command.
All you need to do is add AT command mark.
Note: Function "where" cannot be set by AT command.
For example:
Command "interval", format is shown below.