esky ES610 Start Manual page 11

The reporting server is esky car online platform:
The default password is 000000
So the content of SMS should be:
gprs,000000,cmnet,0,
1) The command possible responses:
①GPRS=Success!
That means everything goes well.
GO TO Step 5.
②GPRS=Fail!
Make sure no parameters are missed.

Make sure the password is the last six numbers of IMEI.

③No Response.
Make sure GPRS spelling correct. No space in the beginning.

Make sure ending character'#'. No space in the end.

Make sure that SIM card has plugged, or plugged in right way.

Make sure SIM supports SMS service. Try to use the SIM card send SMS by your mobile

phone.
Make sure GSM coverage is good.

2) After setting APN, IP and port
Wait for 1 ~2 minutes, you will see that yellow LED is no longer blink. And if GPS has fixed, green
LED does not blink, either.
If not,
① Yellow LED never stops blinking.
Make sure that the APN or IP and port are all right.

Make sure GSM coverage is good.

② Green LED never stops blinking.
www.eskylocate.com:1750,120#
www.eskylocate.com and the port is 1750.
Report server
APN
Password