Presetting A Radio Station; Selecting A Preset Radio Station; Erasing A Preset Radio Station - Onkyo TX-SR800 Instruction Manual

Listening to Radio Broadcasts
STANDBY/ON
STANDBY
POWER
ON OFF
PURE AUDIO UPSAMPLING
ZONE 2 ( GRN )
PHONES
REC ( RED )
AUDIO DVD
SELECTOR

Presetting a radio station

1. Tune into the radio station you desire (see "Tuning
into a radio station" ).
2. Press the MEMORY button on the
front panel.
3. Using the PRESET
select a preset number (from 1 to 40)
to assign the station.
4. Press the MEMORY button to finalize
the procedure.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
• You can enter text names for any of the preset radio stations
(see page 49).
FM MODE PRESET
MEMORY
2
DISPLAY DIMMER REC OUT ZONE OFF
SETUP
TUNING
ENTER
RE TURN
PRESET
DIRECT / PURE AUDIO STEREO SURROUND THX DSP MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
CLEAR
VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 TAPE TUNER PHONO C D
1 2
VCR VCR
DIGITAL S VIDEO
TUNER
MEMORY FM MODE
ch
/ buttons,
TUNI NG
PRESET
MEMORY FM MODE
ch
/
RCVR
MASTER VOLUME
CH
VIDEO 5 INPUT
VIDEO L AUDIO R
TX-SR800

Selecting a preset radio station

1. Press TUNER input source button on
the TX-SR800 or TUN button on the
remote controller. The front display
should show the currently selected
frequency.
2. Press the PRESET
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR MODE button.
The RCVR MODE button lights.
2. Press the TUN button.
3. Press the CH
desired preset station.

Erasing a preset radio station

1. Press the TUNER input source (or TUN) button and
press the PRESET
radio station that you want to erase (see above).
2. Press and hold the MEMORY button and then press
the FM MODE button.
The selected preset station is erased.
TUN
TUNER
/ buttons and
TUNI NG
PRESET
button and select the number of the
/ buttons to select the preset
ch
35