Presetting A Radio Station; Selecting A Preset Radio Station; Erasing A Preset Radio Station - Onkyo TX-SR600 Instruction Manual

Listening to Radio Broadcasts

Presetting a radio station

1. Tune into the radio station you desire (see "Tuning
into a radio station").
2. Press the MEMORY button on the
front panel.
The MEMORY indicator lights red.
"MEMORY"
(Lights red)
3. Using the PRESET
select a preset number (from 1 to 40)
to assign the station.
4. Press the ENTER button to finalize
the procedure.
The memory indicator turns off and the
assigned number lights.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
FM MODE
PRESET
MEMORY
ENTER
TUNER
Flashes
TUNED
MEMORY AUTO
ch
/ buttons,
Lights
TUNED
AUTO
ch
/
RCVR
MODE
CH

Selecting a preset radio station

1. Press the TUNER input source
button.
2. Press the PRESET
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR MODE button.
The RCVR MODE button lights green
(RC-482M) or red (RC-480M).
2. Press the TUN button.
3. Press the CH
the number of the desired preset
station.

Erasing a preset radio station

This can only be performed at the TX-SR700/700E/600/600E.
1. Press the TUNER button and press
the PRESET / buttons to select the
preset radio station that you want to
erase (see above).
2. Press and hold the MEMORY button
and then press the FM MODE button.
The selected preset station is erased.
TUN
/ buttons and
button and select
ch
41