Toyota Rav4 Manual page 217

Setup Menu screen
There are initial setting switches on the
"Setup Menu" screen.
After you change the initial setting, push
the "Enter" switch. The initial setting
switch will be turned off and return to the
picture previously.
When the "Default" switch is pushed, all
menus are initialized.
'08 Rav4_U (L/O 0802)
CHANGING THE AUDIO LANGUAGE
Push the "Audio Language" switch on the
"Setup Menu" and the "Select Audio
Lang." screen appears.
Select the language you want to hear by
pushing the appropriate switch on the
screen.
To return to the "Setup Menu" screen,
push the "Back" switch.
If you cannot find the language you want
to hear, push the "Others" switch. The
"Enter Audio Lang. Code" screen will ap-
pear.
I n f o r ma t i o n P r o v i d e d b y :
To select an audio language, use the joys-
tick to enter the appropriate 4−digit lan-
guage code. For details of the language
codes, see the language code list.
If a code which is not on the list is en-
tered and the "ENT" button is pushed, the
"Incorrect Code" screen will appear. Enter
the code of the language you want to hear
again.
To return to the "Select Audio Lang."
screen, push the "Back" switch.
2008 RAV4 from Feb. '08 Prod. (OM42726U)
217