Table of Contents
Advertisement
Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
1
Select desired
and Regulations included with
this unit before transmitting.
Setting
Setting Dynamike®
Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
1
Initially, set fully
voice volume is available. Dynamike® may have
to be reduced in some conditions.
20
Transmit
channel.
Push and hold mic button to transmit. Transmitter
1
is now activated. When transmitting, hold the
microphone two inches from your mouth and
speak in a clear, normal voice. Release to receive.
Setting TalkBack
This control is used to adjust the desired amount
of modulation talk back that is present at the
speaker during transmit. At fully counter-clockwise
position the talk back is off.
clockwise so that maximum
Operation
Transmit
TalkBack
21
Hide quick links:
Advertisement
Table of Contents
