Table of Contents
Advertisement
INSTALLATION AND SETTINGS ________________
Switching automatic update on/off
The automatic update of the time can be switched off
and then on again.
1
Switch on the device with »ON/OFF«.
2
Press
»MEMO
SET« and hold down.
¥
– The indicator »
« disappears, the update function
is switched off.
3
Press
»MEMO
SET« again and hold it down.
¥
– The indicator »
« flashes. The time will be updat-
ed the next RDS time signal is received.
RADIO MODE
Radio reception
When your device is switched off, the current time is
shown in the display.
Each time a button is pressed, the display of your de-
vice is illuminated for 10 seconds.
1
Switch on the device with »ON/OFF«.
– The channel position appears in the display, short-
ly thereafter the station frequency.
– The previous channel position is automatically se-
lected.
2
Select channel position with the
–
»1 ...
10« once Press once for channel positions
1 ... 5, twice for channel positions 6 ... 10.
3
Switch off device with »ON/OFF«.
– In the display, »GOOD BYE« appears briefly, and
then the current time.
_________________________________________________________
»1 ...
10« buttons.
Adjusting the volume
1
Adjust the volume with
Calling up information
The display on your device supplies information about
the current time or the station frequency. The station
name is shown for RDS stations.
1
Call up the desired information with » MODE«.
»+ VOL
.« or
»VOL .
–«.
ENGLISH
15
Hide quick links:
Advertisement
Table of Contents
