Connecting A Tv Or Projector - Onkyo TX SR607 Instruction Manual

Connecting the AV Receiver—Continued

Connecting a TV or Projector

See "Connecting Components with HDMI" on page 23 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your TV (
Step 2: Audio Connection
Choose an audio connection that matches your TV ( ,
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the
MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings.
• With connection , you can listen to and record audio from your TV and listen in Zone 2.
a
• To enjoy Dolby Digital and DTS, use connection
or and .)
a c
Connection
COMPONENT VIDEO OUT
A
B
a
DIGITAL IN COAXIAL 2 (CBL/SAT)
b
DIGITAL IN OPTICAL 1 (GAME)
c
c
b
A
Connect one or the other
Connection b c , must be assigned (see page 42)
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver
Hint!
to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 29 and
31).
A
a
AV receiver
MONITOR OUT V
TV/TAPE IN L/R
OPTICAL COAXIAL
OUT OUT
COMPONENT VIDEO IN
or ), and then make the connection.
B
, or ), and then make the connection.
b c
or . (To record or listen in Zone 2 as well, use
b c
Signal flow
⇒
⇒
⇐
⇐
⇐
L R
Y P P AUDIO
B R
OUT
TV, projector,
etc.
and
a
TV
Component video input
Composite video input
Analog audio L/R output
Digital coaxial output
Digital optical output
B B
a
VIDEO
IN
,
b
27