Onkyo TX SR607 Instruction Manual page 79

Advanced Setup—Continued
Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
entered, the custom name will appear on the display.
The custom name is edited using the character input
screen.
1. Use the arrow [q]/[w]/[e]/[r] buttons to select a
character, and then press [ENTER].
Repeat this step to enter up to 10 characters.
2. When you've finished, to store a name, be sure to
use the arrow [q]/[w]/[e]/[r] buttons to select
"OK", and then press [ENTER]. Otherwise it will
not be saved.
4-3. Name Edit
Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 –
! @ # $ % ^ &
{ } | : < > ? ; ' , . /
[ ] SP
(Left)/ (Right):
Selected when the cursor is
moved within the Name input
area.
Back:
" Back" moves the cursor
backward one character space.
In addition, "BackSpace" deletes
the character to the left of the
cursor.
OK:
Selects when the entry is com-
plete.
To correct a character:
1. Use the arrow [q]/[w]/[e]/[r] buttons to select
" "(Left) or " "(Right) and then press [ENTER].
2. Press [ENTER] several times to select the incorrect
character (The cursor moves one letter each time
[ENTER] is pressed).
3. Use the arrow [q]/[w]/[e]/[r] buttons to select the
correct character, and then press [ENTER].
Name input area
[ ]
`
~
( ) _
Back
OK
Notes:
• To name a radio preset, use the [TUNER] button to
select AM or FM, and then select the preset (see step
1 on page 78).
• You cannot enter a custom name for SIRIUS radio
presets.
• To restore a custom name to the default, erase the cus-
tom name by entering an empty white space for each
letter.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
79