Connecting The Av Receiver—Continued - Onkyo TXSR307 Instruction Manual

Connecting the AV Receiver—Continued
Connecting the Speaker Cables
FRONT SPEAKERS A
1
Strip about 5/8" (15
mm) of insulation from
the ends of the
speaker cables, and
twist the bare wires
tightly, as shown.
2
Unscrew the terminal.
3
Fully insert the bare wire.
4
Screw the terminal tight.
The following illustration shows which speaker should be connected to each pair of terminals.
right speaker
Front right
speaker A
Speaker Set A
5/8"(15mm)
Surround
Surround
left speaker
Front left Center
speaker A speaker
OTHERS
1
Strip 3/8" (10 mm) of
insulation from the
ends of the speaker
cables, and twist the
bare wires tightly, as
shown.
2
While pressing the lever,
insert the wire into the
hole, and then release the
lever.
Make sure that the
terminals are gripping the bare wires, not
the insulation.
Front right
speaker B
Speaker Set B
3/8"(10mm)
Front left
speaker B
15