Audio Adjust Settings - Onkyo TXSR307 Instruction Manual

Advanced Setup—Continued

Audio Adjust Settings

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.
7. Audio Adjust
Multiplex/Mono Settings
Input (Mux)
This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV broadcasts, and so on.
Input (Mono)
This setting determines which channel is output when the Mono listening mode is used with a stereo source.
PLII/Neo:6 Settings
These settings apply to only 2-channel stereo sources.
Panorama
With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic II Music
listening mode.
Dimension
With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic II Music
listening mode. Higher settings move the sound field backward. Lower settings move it forward.
If the stereo image feels too wide, or there's too much surround sound, move the sound field forward to improve
the balance. Conversely, if the stereo image feels like it's in mono, or there's not enough surround sound, move
it backward.
Center Width
With this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic
II Music listening mode. Normally, if you're using a center speaker, the center channel sound is output by only
the center speaker. (If you're not using a center speaker, the center channel sound will be distributed to the front
left and right speakers to create a phantom center.) This setting controls the front left, right, and center mix,
allowing you to adjust the weight of the center channel sound.
Center Image
The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel stereo sources. With
this setting, you can specify by how much the front left and right channel output is attenuated in order to create
the center channel.
Setting a value [0] in the middle is set to hear a sound. Sound is spread in left and right (the outside) so that the
set value is made big. Please adjust by liking.
Main: The main channel is output (default).
Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
L+R: Both the left and right channels are output (default).
L: Only the left channel is output.
R: Only the right channel is output.
On: Panorama function on.
Off: Panorama function off (default).
–3 to +3 (default: 0)
0 to 7 (default: 3)
0 to 5 (default: 2)
57