Seat - Toro Z500 Series Z Master Setup Instructions

m–8006
6
Step
6
Installing the Seat
Parts needed for this step:
Qty.
1

Seat

4 Flange nuts (installed on the seat)
Procedure
1. Remove the seat
from the crate.
2. Remove the 4
flange nuts from the
studs on the bottom of
the seat.
3. Position the seat
into the holes in the seat
frame.
4. Secure the seat with
4 flange nuts.
5. If needed, attach the two connectors onto the
seat switch.
Part
m–6860
m–6877