Toro Z500 Series Z Master Setup Instructions page 13

Dealer Customer
Initial Initial
Note: When you, the dealer representative, have finished delivering the machine to the customer, sign and date
in the space provided below and keep a copy of this page for dealer records:
Signature:
Signature:
13
Show the customer where the following features are located and how they function:
• Fuel Tank Caps
• Oil Fill Tube/ Oil dipstick
• Oil Filter
• Oil Drain
Spark Plug(s)
•
• Air Filter
• Radiator Coolant (Liquid Cooled Only)
• Hydraulic fluid reservoir
• Hydraulic filter
• Battery
• Ignition Switch
• Throttle Lever
Choke (Not on an EFI machine)
•
• Power Take Off Switch (PTO)
Motion Control Levers
•
• Parking Brake
• Mower Height–of–Cut Lever
Lift Assist Lever
•
• Z Standr
Adjustable Seat
•
• Hydraulic Bypass
• Rollover Protection System (ROPS)
• Flow Baffle
Refer to the operator's manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the Operator's Manual.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com.
Make sure that the customer receives the Operator's Manual, Parts Catalog, and Engine
Owner's Manual, Set Up Instructions, and safety video.
Assist the customer in loading the mower.
Check Procedure
Date:
Date: