Wheels - Toro Z500 Series Z Master Setup Instructions

6. Torque all lower
fasteners, attached to
the machine frame, to
30 ft–lb.
7. Tighten the center
roll bar bolts
(1/2 x 3-1/4 inches) so it
rotates freely with some
resistance.
Note: No more than one
thread should be
exposed outside the nut.
4
8. Tighten the
m–7432
front handles
against the
center roll bar
ends.
Step
3
Installing the Drive Wheels
Parts needed for this step:
Qty.
2 Rear wheels
Procedure
1. Mount the wheels
with the valve stem to
the outside and secure
them with the nuts
previously removed in
Step 1.
2. Torque the nuts to
95 ft-lb (128 N⋅m).
m–7406
Part
m–6859