Beko WMB 51041 PT Instruction page 16

Hide thumbs Also See for WMB 51041 PT:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
the piece out towards yourself.
If the filter cap is one piece, pull the cap from both
sides at the top to open.
You can remove the filter cover by slightly
C
pushing downwards with a thin plastic tipped
tool, through the gap above the filter cover. Do
not use metal tipped tools to remove the cover.
Some of our products have emergency draining
hose and some does not have. Follow the steps
below to discharge the water.
Discharging the water when the product has an
emergency draining hose:
Dark wash Dark wash Synthetics Cottons Pre-wash
Drain
Anti-
creasing
Daily
Rinse hold
express
Mixed 40
Super 40 Extra rinse Freshen
Duvet
Child-
Hand
(Bedding)
proof lock
Wash
Start/
No spin
Quick
Pause
wash
Shirts
up
Pull the emergency draining hose out from its seat
Place a large container at the end of the hose. Drain
the water into the container by pulling out the plug at
the end of the hose. When the container is full, block
the inlet of the hose by replacing the plug. After the
container is emptied, repeat the above procedure
to drain the water in the machine completely. When
draining of water is finished, close the end by the
plug again and fix the hose in its place. Turn the
pump filter to take it out.
Discharging the water when the product does not
have an emergency draining hose:
Place a large container in front of the filter to
catch water from the filter. Loosen pump filter
(anticlockwise) until water starts to flow. Fill the
flowing water into the container you have placed in
front of the filter. Always keep a piece of cloth handy
to absorb any spilled water. When the water inside
the machine is finished, take out the filter completely
by turning it. Clean any residues inside the filter
as well as fibers, if any, around the pump impeller
region. Install the filter.
If your product has a water jet feature, be sure
A
to fit the filter into its housing in the pump.
Never force the filter while installing it into its
housing. Seat the filter into its place completely.
Otherwise, water may leak from the filter cap.
If the filter cap is composed of two pieces, close the
filter cap by pressing on the tab. If it is one piece,
seat the tabs in the lower part into their places first,
and then press the upper part to close.
Main
Rinse
wash
Baby
Cotton
Woolens
Eco
Temperature
Finished
Cold
Jeans
Sport Time delay Intensive
16
EN
Wash
Spin
Delicates
expres 14
Daily
Super short
express
Self
Lingerie
Clean
Fasion
care
Pet hair
removal
mini 30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmb 61241 mWmb 61041 ptmsWmb 61241 ms

Table of Contents