Table of Contents
Advertisement
Operation (automatic and manual modes)
Activating and altering the operating
hours counter for the NoSmell active
charcoal filter
The charcoal filter is needed for
recirculation mode.
The operating hours counter for the
charcoal filter needs to be activated
once and the operating hours counter
needs to be set to suit the kind of
cooking you do:
Press the On/Off touch control to
switch the fan off.
Touch the run-on option control
and the charcoal filter control at
the same time.
The charcoal filter symbol and one of
the fan power settings will flash.
Fan power setting indicators 1 to IS
show the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
IS ........................................ Deactivated
Touch the relevant control to select
the duration required.
Confirm the selection by pressing the
charcoal filter touch control .
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
24
Reading the filter operating hours
counter
To check the percentage of time set
already used:
Press the On/Off touch control to
switch the fan on.
Press and hold the grease filter
control or the charcoal filter
control .
One or more of the fan power setting
indicators will flash.
The number of flashing indicators
shows the percentage of the operating
time which has already been used up.
Indicator 1 ................................... 25 %
Indicators 1 and 2 ........................ 50 %
Indicators 1 to 3 .......................... 75 %
Indicators 1 to IS ....................... 100 %
The number of operating hours used
remains in the memory even when the
appliance is switched off or there is a
power cut.
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
