Connecting Gas & Electrical - Viking 5 SERIES Installation Manual

Anti-tip Device Installation (Floor Mount)
1
Locate anti-tip bracket hook on the floor 8-1/2" (21.6 cm) from side
cabinet and 1-1/2" (3.8 cm) from rear wall. Mark and
drill 1/8" (.32 cm) holes where bracket will be located.
3
x2
Remove two screws from back of range.
Connecting Gas & Electric
DANGER
Gas leak hazard.
To avoid risk of personal injury
or death; leak testing of the
appliance must be conducted
according to the manufacturer's
instructions. Before placing appliance in
operation, always check for gas leaks
with soapy water solution.
• DO NOT USE AN OPEN FLAME TO
CHECK FOR GAS LEAKS.
8 - 1 8 - 1 8 - 1
/ 2 / 2 / 2
( 2 1 ( 2 1 ( 2 1
" " "
. 6 . 6 . 6
c m c m c m
) ) )
Ø Ø Ø
1 / 1 / 1 /
8 " 8 " 8 "
( . 3 ( . 3 ( . 3
2 c 2 c 2 c
m ) m ) m )
Connect gas and electrical. Before placing appliance in operation,
always check for gas leaks. This must be performed by your
dealer, a qualified licensed plumber, or gas service company.
23
2
1
1
Mount anti-tip bracket hook to floor
using screws provided.
4
Attach bracket to back of range using two screws.
1