Front Panel; Front & Rear Panels - Onkyo TX-SR502 Instruction Manual

TX-SR502_En.book Page 6 Friday, March 12, 2004 1:05 PM
Front & Rear Panels

Front Panel

American Model
B
STANDBY/ON
A SPEAKERS B
PHONES
O P
Other Models
A
STANDBY/ON
POWER
ON OFF
A SPEAKERS B
For detailed information, refer to the pages in
parenthesis.
A
POWER switch (31)
The American model doesn't have this switch.
This is the main power switch. When set to OFF, the
AV Receiver is completely shutdown. When set to
ON, the AV Receiver is in Standby mode and the
STANDBY indicator lights up.
Don't turn on the power until you've completed,
and double-checked all connections (pages 17–30).
B
STANDBY/ON button (31)
This button is used to set the AV Receiver to On or
Standby. For models with a POWER switch, this
button has no effect unless the POWER switch is set
to ON.
C
STANDBY indicator (31)
This indicator lights up when the AV Receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
6
C 5 G H I
STANDBY
LISTENING
TONE STEREO MODE DISPLAY DIGITAL INPUT
MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO
VCR
Q R S
D 6
PURE AUDIO
STANDBY
LISTENING
TONE PURE AUDIO MODE DISPLAY DIGITAL INPUT
J K L M
TUNING
PRESET
ENTER
SETUP RETURN
MEMORY TUNING MODE
CLEAR
3 TAPE TUNER C D
S VIDEO
T U V W
TUNING
PRESET
ENTER
SETUP RETURN
MEMORY TUNING MODE
CLEAR
D
PURE AUDIO indicator (41)
The American model doesn't have this indicator.
This indicator lights up when the Pure Audio listen-
ing mode is selected. (No video signals are output in
this mode.)
E
STEREO button (41)
This button is used to select the Stereo listening
mode. (American model only)
F
PURE AUDIO button (41)
The American model doesn't have this button.
This button is used to select the Pure Audio listen-
ing mode.
G
LISTENING MODE [
These buttons are used to select the listening modes.
H
DISPLAY button (35)
This button is used to display various information
about the currently selected source.
I
DIGITAL INPUT button (31, 47)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
J
Display
N
MASTER VOLUME
3 INPUT
VIDEO
VIDEO L R
AUDIO
X
MASTER VOLUME
VIDEO 3 INPUT
] [ ] buttons (41)