Onkyo TX-SR502 Instruction Manual page 7

TX-SR502_En.book Page 7 Friday, March 12, 2004 1:05 PM
Front & Rear Panels —Continued
K
Remote control sensor (9)
This sensor receives control signals from the remote
controller.
L
Arrow buttons
These buttons are used to select and adjust settings.
TUNING [ ] [ ] buttons
These buttons are used to tune into radio stations.
PRESET [ ] [ ] buttons
These buttons are used to select radio presets.
M
ENTER button
This button is used to confirm settings.
N
MASTER VOLUME control (34)
This control is used to set the volume of the AV
Receiver.
O
SPEAKER A & B buttons (34)
These buttons are used to turn speaker sets A and B
on and off.
P
PHONES jack (39)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
Display
4
For detailed information, refer to the pages in
parenthesis.
1
MUTING indicator (39)
This indicator flashes when the AV Receiver is
muted.
2
Source/listening mode indicators (42)
These indicators show the currently selected listen-
ing mode and digital audio format.
3
Tuning indicators (36)
TUNED (36): This indicator lights up when the AV
Receiver is tuned into a radio station.
AUTO (36): This indicator lights up when Auto
Tuning is selected, and disappears when Manual
Tuning is selected.
RDS (European model only) (36): This indica-
tor lights up when the AV Receiver is tuned to a
radio station that supports RDS (Radio Data Sys-
tem).
1 2
5
Q
TONE, [–] & [+] buttons (38)
These buttons are used to adjust the bass and treble.
R
MULTI CH button (35)
This button is used to select the multichannel DVD
input.
S
Input selector buttons (31, 34, 45)
These buttons are used to select the input sources.
T
MEMORY button (36, 37)
This button is used to preset radio stations.
U
TUNING MODE button (37)
This button is used to select the Auto or Manual
Tuning mode.
V
SETUP button
This button is used to access various settings.
W
RETURN button
This button is used to return to the previous screen
when changing settings.
X
VIDEO 3 INPUT (27)
These S-Video, composite video, and analog audio
inputs can be used to connect a camcorder or games
console.
3
MEMORY (36): This indicator lights up when pre-
setting radio stations.
FM STEREO (36): This indicator lights up when
the AV Receiver is tuned to a stereo FM station.
4
SLEEP indicator (39)
This indicator lights up when the Sleep function has
been set.
5
Message area
This area of the display shows various information
about the currently selected source.
7