Onkyo TX-SR502 Instruction Manual page 11

TX-SR502_En.book Page 11 Friday, March 12, 2004 1:05 PM
Remote Controller —Continued
For detailed information, refer to the pages in
parenthesis.
A
STANDBY button (31)
This button is used to set the AV Receiver to
Standby.
B
ON button (31)
This button is used to turn on the AV Receiver.
C
Input selector buttons (34)
These buttons are used to select the input sources.
D
MULTI CH button (35)
This button is used to select the multichannel DVD
input.
E
TONE, [–] & [+] buttons (38)
These buttons are used to adjust the bass and treble.
F
DIMMER button (38)
This button is used to adjust the display brightness.
G
Arrow [ ]/[ ]/[ ]/[
This button is used to select and adjust settings.
H
CH +/– button (37)
This button is used to select radio presets.
I
RETURN button
This button is used to return to the previous screen
when changing settings.
J
DISPLAY button (35, 37)
This button is used to display various information
about the currently selected input source.
K
SP A & SP B buttons (34)
These buttons are used to turn on and off speaker
sets A and B.
L
Listening mode buttons (42)
SURR button
This button is used to select the Dolby and DTS lis-
tening modes.
ALL ST button
This button is used to select the All Ch Stereo listen-
ing mode.
STEREO button
This button is used to select the Stereo listening
mode.
PURE A button (not American model)
This button is used to select the Pure Audio listen-
ing mode. In this mode, the display and internal
video circuitry are turned off, minimizing the possi-
bility of interference, for a high fidelity sound that's
true to the original. (No video signals are output in
this mode.)
DIRECT button
This button is used to select the Direct listening
mode.
[ DSP] & [DSP
These buttons are used to select the Onkyo original
DSP (digital signal processor) listening modes.
] & ENTER button
] buttons
M
TEST TONE, CH SEL, LEVEL- & LEVEL+
buttons
These buttons are used to adjust the level of each
speaker individually.
N
L NIGHT button
This button is used to set the Late Night function.
O
REMOTE MODE buttons (10)
These buttons are used to select the remote control-
ler modes. When you use the remote controller, the
mode button for the currently selected mode lights
up.
P
SLEEP button (39)
This button is used to set the Sleep function.
Q
VOL button (34)
This button is used to set the volume of the AV
Receiver.
R
SETUP button (32, 48)
This button is used to access various settings.
S
MUTING button (39)
This button is used to mute the AV Receiver.
T
CINE FLTR button (46)
This button is used to set the CinemaFILTER func-
tion.
11