Safety And Instructional Decals - Toro 38272 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—do not place your hand in
the chute; remove the ignition key and read the instructions
before servicing or performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—stop the engine
before leaving the machine.
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
1. Primer
2. Push the primer two times to prime the engine.
3. Push key in to switch engine On.
117-6047
117-7713
4. Fuel spill hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. Release the control bar to disengage the auger.
117–7741
4. Pull key to switch engine switch Off.
5. Remove key to lock machine.
6. Read the Operator's Manual before checking engine oil level.
4