Setup; Greasing The Machine; Replacing The Warning Decal - Toro 30607 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Materials
Declaration of conformity
Note: Determine the left and right sides of the machine
from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Before the machine is operated, it must be greased to ensure
proper lubricating characteristics; refer to Greasing the
Bearings and Bushings in Lubrication. Failure to properly
grease the machine will result in premature failure of critical
parts.
Description
No parts required
Warning Decal
Qty.
–
1
Qty.
1 Review before operating machine
1 Use to reference engine information
1 Use to reference part numbers
1
Review before operating machine
1
2

Replacing the Warning Decal

Parts needed for this procedure:
1 Warning Decal
Procedure
On machines requiring European CE compliance, replace
the warning decal, part no. 117–2754 with the warning decal
part no. 117–2766.
15
Use
Grease the machine.
Used only on machines requiring
European CE compliance.
Use