Recording A Source; Other - Onkyo TX-L5 Instruction Manual

Recording a source

To record the input source signal you
are currently watching or listening to
Recording of video and/or audio signals can be performed on
the components connected to the VIDEO 1 OUT, HD OUT
(audio only) and MD/TAPE OUT (audio only) jacks.
DVD / C D VIDEO 1 VIDEO 2 H D MD / TAPE
FM AM
SURROUND STEREO SUBWOOFER MODE MEMORY FM MODE TUNING/PRESET
INPUT dial
1
Press an input selector button to
select the input source to record.
Remote controller
The input source is now selected and you
DVD/CD VIDEO 1 VIDEO 2
may watch or listen to it as desired. The
INPUT SELECTOR
currently selected input source signal to
HD MD/TAPE
the VIDEO 1 OUT, HD OUT and MD/TAPE
OUT outputs for recording.
Unit
INPUT
2
Start recording at the recording
component as desired.
Notes:
• You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
• If you change the input source during recording, you will record
the signals from the newly selected input source.
• You cannot record the surround effects.
VOLUME
INPUT
ACOUSTIC
CONTROL
5
AV RECEIVER TX-L
ON STANDBY SLEEP DIMMER
DVD/CD VIDEO 1 VIDEO 2 DISPLAY
INPUT
INPUT SELECTOR
HD MD/TAPE TUNER
SELECTOR
DVD MD
DVD MD
Control
TOP MENU MENU
ENTER
RETURN SETUP
PLAY
SURR MODE STEREO SP SETUP SW MODE
Recording the video from one source
and the audio from another
You can add the sound from one source to the video of
another source to make your own video recordings.
Below is an example of recording the sound from a MD player
connected to MD/TAPE L/R jacks and the video from a video
camera connected to VIDEO 2 IN VIDEO jack to video
cassette tape in a video cassette recorder connected to the
VIDEO 1 OUT L/R and VIDEO jacks.
VIDEO 2
DVD/CD VIDEO 1
IN OUT IN IN
VIDEO
IN OUT IN IN
L
AUDIO
R
DVD/CD VIDEO 1 VIDEO 2
Video cassette
recorder
1
Insert a MD in the MD player and
insert a tape in the video camera
connected to the VIDEO 2.
2
Insert a video tape for recording in
the video cassette recorder
connected to VIDEO 1 OUT.
3
Press VIDEO 2 on the remote
controller.
DVD/CD VIDEO 1 VIDEO 2
INPUT SELECTOR
HD MD/TAPE
4
Press MD/TAPE on the remote
controller.
DVD/CD VIDEO 1 VIDEO 2
This switches the audio output to MD, but
INPUT SELECTOR
HD MD/TAPE the video output remains VIDEO 2 that has
been selected in step 3.
5
Start recording on the video
cassette recorder and start playing
at the MD player and video camera
as desired.
The recorded video signal becomes the
output from the video camera and
recorded audio signal becomes that from
the MD player.
Notes
• You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
• If you change the input source during recording, you will record
the audio signals from the newly selected input source and the
video signals assigned to that input source.
• You cannot record the surround effects.
Video
camera
MON V
DVD/CD VIDEO 1
OUT IN OUT IN
OUT IN OUT IN
L
R
HD MD/TAPE
MD player
35