Side-Discharging The Clippings - Toro Recycler 20655 Operator's Manual

Removing the Grass Bag
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
1. Go to the left side of the lawn mower.
2. Step on the
handle release
lever.
m-7312
3. Raise the
handle to the
vertical position.
4. Raise and hold up
the rear door.
5. Remove the bag.
9
Side Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
rear discharge plug (refer to Removing the Grass Bag
on page 9) before side discharging the clippings.
Important: Ensure that
the rear discharge plug
is in place before you
side discharge the
clippings.
Installing the Side Discharge Chute
1. Unlock the
side discharge
door.
2. Lift open the side
discharge door.
m-7309
3. Install the side discharge chute and close the
door onto the chute.
m-6895
Removing the Side Discharge Chute
To remove the side discharge chute, reverse the
steps above.
Important: Lock
the side discharge
door after you
close it.
m-6896
3352-580
m-5587
m-7195
m-5584
m-5585
m-7196