6. Loosen the
handle knobs until
you can move the
upper handle
freely.
7. Fold the upper
handle rearward as
shown.
m-7309
Important: Route the cables to the outside of the
handle knobs as you unfold the upper handle.
8. To unfold the handle, refer to Unfolding the
Handle on page 4.
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine
rapidly using the starter to blow the excess oil from
the cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 Nm).
3. Connect the wire to the spark plug.
15
m-6289
3352-580